Install the basis of jaw crusher demand

Since the machine large amount of vibration at work, so the machine should be installed in reinforced concrete structures, based on the weight of the basis of general desirability of the machine-based weight 8-10 times greater than the depth of ground freezing depth of the land area basic plan provides the size of anchor bolts for the host and the relative positions of electric motors and the associated other parameters, not as construction drawings. Installation of anchor bolt holes Department must set aside set aside, as a basis for the second grouting. Trough under the height and size of the discharge means according to the lower part of the decision by the scene.
In order to reduce vibration, the installation of equipment, should be among the breakers and concrete foundation pad of not less than 10 mm thick rubber bands cloth cushioning material, to be a solid second after the cement grouting anchor bolts tightened. In these processes, the machine must be level to measure the level of degree, level of degree of deviation of the width of the rack front wall within the framework of control in 2 mm below the level of degree of test rack is particularly important, it can ensure that the feed I have not positioned to due to skew Ershi crusher at work occurs when the phenomena of unilateral feeding to avoid damage to equipment due to uneven loading.
Installation of electrical inspection and the host other than by the distance, we must also check the motor pulley and the host parallel to the corresponding slot wheel center to ensure that all of the V-belt to work effectively and consistently.
Nesting population size of products should be required to adjust the size and processing power, in adjusting the discharge port when the first release the tension spring, to be well adjusted, after an appropriate adjustment of the spring and then the degree of swelling to prevent the elbow plate off at work, see adjustment components.